Mulch Calculator

Work out how much mulch, bark or wood chips to buy for garden beds, borders and rings around trees. Enter the beds and the depth, and get the volume in cubic yards, cubic feet and cubic meters, the number of bags, and the cost in bags or in bulk.

Units
Beds to cover

Add one row per bed. Use “How many” for identical beds or tree rings. Feet: 10.5 or 10' 6"

Bed 1

Usually 2–4 in (5–10 cm). Keep mulch a few inches away from trunks and stems.

Fresh mulch settles; 10 % is a common allowance.

Bags and prices (optional)

Result

Mulch needed2.04 cu yd
Bags28
Result
Area200 sq ft
Volume before extra50 cu ft · 1.85 cu yd
Volume with 10% extra55 cu ft · 2.04 cu yd · 1.56 m³
Bags (2 cu ft)28

Calculation settings

  • Units: US (ft, in)
  • Bed 1: Rectangle — 10 × 20
  • Mulch depth: 3 in · Extra for settling: 10%

How this was calculated

  1. Area10 × 20 = 200 sq ft
  2. Volume200 × 0.25 ft = 50 cu ft
  3. With extra50 × 1.1 = 55 cu ft
Show all 4 steps
  1. Bagsround up(55 cu ft ÷ 2 cu ft) = 28

Enter the beds and the depth, and get the volume in cubic yards, cubic feet and cubic meters, the number of bags, and the cost in bags or in bulk.

How to use the mulch calculator

  1. Add each bed: rectangle, circle, ring around a tree or a known area.
  2. Enter the mulch depth — 2–4 in for most beds.
  3. Keep 10 % extra for settling, or change it.
  4. Pick your bag size, or enter a bulk price per cubic yard.

How deep should mulch be

Most beds need 2–4 in (5–10 cm) of mulch. Fine mulch can be thinner; coarse bark and wood chips are often laid thicker. Too much mulch can starve roots of air, and mulch piled against trunks invites rot, so keep it a few inches away.

DepthArea 1 cu yd coversArea 1 m³ covers
2 in (5 cm)162 sq ft20 m²
3 in (7.5 cm)108 sq ft13.3 m²
4 in (10 cm)81 sq ft10 m²

Bags versus bulk

Bagged mulch in the US usually comes in 2 or 3 cu ft bags; a cubic yard is 27 cu ft, so it takes 13.5 bags of 2 cu ft. Above two or three cubic yards, bulk delivery is usually cheaper. Enter both prices to compare.

Mulch calculator formulas

Rectangle
length × width
Circle
π × (diameter ÷ 2)²
Tree ring
π × ((outer ÷ 2)² − (trunk ÷ 2)²)
Volume
area × depth
With extra
volume × (1 + extra % ÷ 100)
Bags
round up(volume with extra ÷ bag volume)

Worked example

  1. A 10 × 20 ft bed at 3 in deep: 200 sq ft × 0.25 ft = 50 cu ft = 1.85 cu yd.
  2. With 10 % for settling: 55 cu ft = 2.04 cu yd.
  3. In 2 cu ft bags: 55 ÷ 2 = 27.5, rounded up to 28 bags.

Assumptions

  • Depth is the same across all beds.
  • Bag volume is the loose volume printed on the bag.
  • Extra covers settling and uneven ground.
  • Bulk cost uses the exact volume.

Frequently asked questions

How much area does a yard of mulch cover?

About 108 sq ft at 3 in deep, 162 sq ft at 2 in and 81 sq ft at 4 in.

How many bags of mulch are in a yard?

A cubic yard is 27 cu ft: 13.5 bags of 2 cu ft or 9 bags of 3 cu ft.

How deep should I put mulch?

2–4 in for most beds. Keep it thinner over fine-rooted plants and away from trunks.

How do I mulch around a tree?

Choose “Ring around a tree”, enter the outer diameter of the mulched circle and the trunk diameter; use “How many” for several trees.

Should I add extra mulch?

Fresh mulch settles and compacts over a few weeks, so 10 % extra is common.

Does this work for bark, wood chips and pine straw?

Yes for anything sold by volume. Pine straw sold by the bale has its own coverage, so use the coverage from the seller instead.