Paint Calculator

Find out how much paint to buy for a room. Enter the room size or each wall, subtract doors and windows, add the ceiling if needed, and choose the number of coats. The calculator uses the coverage printed on your can and shows the gallons or liters and the cans to buy.

Units
Measure by
Room

Feet: 12.5 or 12' 6"

Doors and windows

Typical sizes are filled in; change them to match yours.

Paint

Two coats is standard; one may do for a refresh in the same color.

For touch-ups, rollers and trays.

From the can or data sheet. Typical: 350–400 sq ft/gal or 8–12 m²/L; rough or porous surfaces take more.

Price (optional)

Result

Paint2.09 gal
Buy2 × 1 gal + 1 × 1 qt
Result
Wall area384 sq ft
Doors and windows− 51 sq ft
Walls to paint333 sq ft
Paint for 2 coats2.09 gal
Buy2 × 1 gal + 1 × 1 qt
In the cans you buy2.25 gal

Calculation settings

  • Units: US (ft, in) · Measure by: Room size
  • Coats: 2 · Coverage per coat: 350 sq ft/gal · Extra: 10%

How this was calculated

  1. Walls2 × (12 + 12) × 8 = 384 sq ft
  2. Openings1 × 21 + 2 × 15 = 51 sq ft
  3. Surface333 sq ft
Show all 5 steps
  1. Paint333 × 2 ÷ 350 × 1.1 = 2.09 gal
  2. Cans2.09 gal → 2 × 1 gal + 1 × 1 qt = 2.25 gal

The calculator uses the coverage printed on your can and shows the gallons or liters and the cans to buy.

How to use the paint calculator

  1. Measure the room (length, width and wall height) or each wall separately.
  2. Enter the number of doors and windows; typical sizes are filled in.
  3. Tick the ceiling if you are painting it.
  4. Set the coats and the coverage from your paint can.
  5. Optionally add primer and a price to see the cost.

Paint coverage

Coverage is how much surface one gallon or liter covers in one coat. Most interior paints state 350–400 sq ft per gallon, which is about 8.6–9.8 m² per liter; European emulsions are often labelled 8–12 m²/L. New plaster, bare drywall, textured walls and strong color changes use more paint, so use the lower figure for them.

How many coats

Two coats is the norm for an even finish. One coat can work when repainting in a similar color with a good-quality paint. Over new drywall or plaster, start with a coat of primer.

Doors and windows

A standard US interior door is about 21 sq ft and a window about 15 sq ft; in metric countries a door is about 1.9 m² and a window about 1.7 m². Change the sizes if yours are larger, such as patio doors.

Paint calculator formulas

Wall area
2 × (length + width) × height
Walls to paint
wall area − doors × door area − windows × window area
Ceiling
length × width
Paint
surface × coats ÷ coverage × (1 + extra % ÷ 100)
Primer
surface ÷ primer coverage × (1 + extra % ÷ 100)
Cans
smallest total volume that covers the paint, then fewest cans

Worked example

  1. A 12 × 12 ft room with 8 ft walls: 2 × (12 + 12) × 8 = 384 sq ft.
  2. Minus 1 door (21 sq ft) and 2 windows (30 sq ft): 333 sq ft.
  3. Two coats at 350 sq ft/gal: 333 × 2 ÷ 350 = 1.90 gal.
  4. With 10 % extra: 2.09 gal — buy 2 gallons and 1 quart.

Assumptions

  • Coverage is the figure you enter from the can, for one coat on a smooth, sealed surface.
  • Room mode assumes four walls of the same height.
  • Primer is one coat on the same surface.
  • Cost uses the paint volume in the cans you buy.

Frequently asked questions

How much paint do I need for a 12 × 12 room?

With 8 ft walls, one door and two windows, about 333 sq ft of wall. Two coats at 350 sq ft per gallon need about 1.9 gallons, so 2 gallons is usually enough.

How many square feet does a gallon of paint cover?

Usually 350–400 sq ft per coat on smooth, primed walls. Check the label: textured or porous surfaces need more paint.

Should I subtract doors and windows?

Yes for large openings. The calculator subtracts typical sizes; set the count to 0 if you prefer a margin.

How much paint for a ceiling?

Tick “Paint the ceiling too”; its area is length × width and it gets the same number of coats.

Do I need primer?

Use primer on new drywall or plaster, stains, or big color changes. Many paint-and-primer products still recommend a primer on bare surfaces.

How many liters of paint per square meter?

At a typical 10 m²/L, one coat needs about 0.1 L per m², two coats about 0.2 L per m².