Get the volume in cubic feet, cubic yards and cubic meters, then the number of pre-mixed bags, ready-mix truckloads, or the cement, sand, gravel and water to mix it yourself. Every result shows the formula with your numbers.
How to use the concrete calculator
- Add each element you are pouring and pick its shape: slab, wall, round column, tube, steps or a known volume.
- Enter the measurements; use “How many” for identical elements.
- Set the extra for waste — 5–10 % is typical.
- Choose how you will get the concrete: bags, a ready-mix truck or mixing it yourself.
- Optionally add prices to see the material cost.
How much concrete is in a bag
A bag's yield is the volume of concrete it makes after mixing. Manufacturers print it on the bag. These are the yields for standard concrete mix:
| Bag | Yield | Bags per cu yd |
|---|---|---|
| 40 lb | 0.30 cu ft | 90 |
| 50 lb | 0.375 cu ft | 72 |
| 60 lb | 0.45 cu ft | 60 |
| 80 lb | 0.60 cu ft | 45 |
Yields from the QUIKRETE Concrete Mix data sheet. Other products may differ — check your bag.
Slab thickness
Walkways and patios are usually 4 in thick; driveways for cars are often 4–6 in and more for heavy vehicles. Thickness has a big effect on volume: going from 4 to 6 in adds 50 % more concrete.
Bags, ready-mix or mixing yourself
Bags suit small jobs such as posts and steps. Above roughly one cubic yard, a ready-mix truck is usually easier and gives more consistent concrete; ask the plant about minimum loads. Mixing from cement, sand and gravel is cheapest in materials but the strength depends on accurate measuring and water.
Mixing your own concrete
Proportions such as 1 : 2 : 3 mean one part cement, two parts sand and three parts gravel. By volume, the dry ingredients shrink into a smaller volume when mixed, so the calculator multiplies by a dry-volume factor of 1.54. Weight-based grades (M150–M300) come from common Eastern European tables for cement grade M400. Both are typical estimates, not a lab mix design.
Concrete calculator formulas
- Slab or wall
length × width (or height) × thickness- Round column
π × (diameter ÷ 2)² × height- Tube
π × ((outer ÷ 2)² − (inner ÷ 2)²) × height- Steps
width × rise × run × n × (n + 1) ÷ 2- With extra
volume × (1 + extra % ÷ 100)- Bags
round up(volume with extra ÷ bag yield)- Cement, by volume
1.54 × 1 ÷ (1 + sand + gravel) × 1,440 kg/m³ per m³- Cement, by weight
2,350 kg/m³ ÷ (1 + sand + gravel + water/cement) per m³
Worked example
- A 10 × 10 ft patio, 4 in thick: 10 × 10 × 4 ÷ 12 = 33.33 cu ft = 1.23 cu yd.
- With 10 % extra: 33.33 × 1.10 = 36.67 cu ft.
- In 80 lb bags (0.60 cu ft each): 36.67 ÷ 0.60 = 61.1, rounded up to 62 bags.
- In 60 lb bags (0.45 cu ft each): 36.67 ÷ 0.45 = 81.5, rounded up to 82 bags.
Assumptions
- Bag yields are typical manufacturer figures; check your product.
- Steps are a solid flight resting on the ground.
- Mix-yourself quantities are typical estimates: fresh concrete 2,350 kg/m³, dry-volume factor 1.54, loose cement 1,440 kg/m³, sand 1,600 kg/m³, gravel 1,500 kg/m³.
- Ready-mix cost uses the exact volume; plants may charge minimum or short-load fees.
- No reinforcement, forms or base material are included.
Frequently asked questions
How do I calculate how much concrete I need?
Multiply length × width × thickness in the same units to get the volume, then add 5–10 % for waste. Divide cubic feet by 27 for cubic yards. The calculator does this for every shape and shows the formula.
How many 80 lb bags of concrete make a yard?
About 45. An 80 lb bag yields roughly 0.60 cu ft and a cubic yard is 27 cu ft. For 60 lb bags it is 60, for 40 lb bags 90.
How many bags do I need for a 10 × 10 slab?
At 4 in thick, a 10 × 10 ft slab is 33.3 cu ft — 56 bags of 80 lb without extra, or 62 with 10 % extra.
Is it cheaper to buy bags or ready-mix?
For small jobs, bags. Above about one cubic yard ready-mix usually wins on labour and consistency, but check the plant's minimum load and short-load fee. Enter both prices to compare.
What is the mix ratio for concrete?
A common general-purpose home mix is 1 : 2 : 3 (cement : sand : gravel) by volume; 1 : 1.5 : 3 is stronger and 1 : 2 : 4 leaner. Use the Mix it yourself mode to get the cement bags, sand and gravel.
Does the calculator design rebar or footing sizes?
No. It estimates material only. Footing size, slab thickness for loads and reinforcement depend on soil, loads and local codes.