Concrete Block Calculator

Find out how many concrete blocks (CMU) or aerated concrete blocks you need for a wall. Enter the wall length and height, subtract doors and windows, and choose the block size. The calculator includes the joint thickness and shows mortar or adhesive, volume, pallets and cost.

Units
Wall

Add up all walls built from this block.

Enter 0 if there are none.

Block
Laid on
Adhesive, pallets and prices (optional)

Typical: about 1,500 kg for adhesive, 1,800 kg for mortar.

Result

Blocks331
Volume of blocks174.01 cu ft · 6.445 cu yd
Mortar1,384 lb · 18 × 80 lb
Result
Wall area320 sq ft
Area to build280 sq ft
Blocks per area1.125 / sq ft
Blocks without extra315
Blocks with 5% extra331
Volume of blocks174.01 cu ft · 6.445 cu yd
Masonry volume177.92 cu ft · 6.59 cu yd
Joint volume12.31 cu ft · 0.456 cu yd
Mortar: dry mix1,384 lb
Bags18

Calculation settings

  • Units: US (ft, in)
  • Block size: CMU 8 × 8 × 16 in · Laid on: Mortar

How this was calculated

  1. Area40 × 8 − 40 = 280 sq ft
  2. Blocks per area1 ÷ ((15.625 + 0.375) × (7.625 + 0.375)) in² = 1.125 / sq ft
  3. Blocksround up(280 × 1.125 × 1.05) = 331
Show all 5 steps
  1. Volume331 × 15.625 × 7.625 × 7.625 in = 174.01 cu ft · 6.445 cu yd
  2. Dry mix12.31 cu ft · 0.456 cu yd × 1,800 kg/m³ = 1,384 lb

The calculator includes the joint thickness and shows mortar or adhesive, volume, pallets and cost.

How to use the block calculator

  1. Enter the total length and height of the walls and the area of openings.
  2. Choose a block size or enter your own.
  3. Check the joint type and thickness.
  4. Optionally add bag weight, blocks per pallet and prices.

Blocks per square foot

A standard 8 × 8 × 16 in CMU covers 16 × 8 in including a ⅜ in joint, so a square foot takes 1.125 blocks and 100 sq ft about 113 blocks. Aerated blocks laid on thin-bed adhesive have 2–3 mm joints, so the count is close to the face area of the block.

BlockJointBlocks per 100 sq ftBlocks per m²
CMU 8 × 8 × 16 in⅜ in112.512.1
Concrete 400 × 200 mm10 mm10811.6
Aerated 600 × 250 mm3 mm616.55
Foam 600 × 300 mm3 mm515.47

Mortar and adhesive

The calculator works out the joint volume from the block and joint sizes. Cement mortar needs roughly 1.8 kg of dry mix per liter of joint; thin-bed adhesive about 1.5 kg — about 25 kg per cubic meter of aerated masonry with 3 mm joints. Use the figure on your bag if it differs.

Block calculator formulas

Area to build
wall length × height − openings
Blocks per area
1 ÷ ((block length + joint) × (block height + joint))
Blocks
round up(area × blocks per area × (1 + extra % ÷ 100))
Volume of blocks
blocks × length × height × thickness
Joint volume
area × thickness × (1 − block face ÷ (block face with joint))
Dry mix
joint volume × kg per m³

Worked example

  1. A 40 ft × 8 ft wall with 40 sq ft of openings: 280 sq ft to build.
  2. CMU 8 × 8 × 16 with ⅜ in joints: 1.125 blocks per sq ft → 315 blocks.
  3. With 5 % extra: 331 blocks.

Assumptions

  • Walls are one block thick (thickness = wall thickness).
  • Openings are subtracted in full; lintels and bond beams are not counted separately.
  • Joint material is computed from the joint geometry; dry-mix figures are typical.
  • Extra is applied to the block count and rounded up.

Frequently asked questions

How many concrete blocks per square foot?

1.125 standard 8 × 8 × 16 blocks per square foot with ⅜ in joints, or 112.5 per 100 sq ft.

How many blocks for a 10 × 8 wall?

80 sq ft × 1.125 = 90 blocks, about 95 with 5 % extra.

How many aerated blocks are in a cubic meter?

For 600 × 250 × 300 mm blocks: 1 ÷ 0.045 = 22.2 blocks per m³.

How much mortar for concrete blocks?

The joints of 100 standard blocks with ⅜ in joints hold about 4 cu ft of mortar; allow extra for droppings. The calculator gives the joint volume for your block size.

How much adhesive for aerated blocks?

Roughly 25 kg per cubic meter of masonry with 3 mm joints — one 25 kg bag per m³.

Does the calculator include reinforcement or lintels?

No. It counts blocks and joint material only; structural details depend on your design and local code.